Feature #307
support multiple abstraction definitions for bus interface of component
100%
Description
currently only one abstraction definition can be entered and displayed in the Bus interface tab of the component editor. Even if I have multiple abstraction definitions for a bus interface, only the first one is shown in the tool.
We expect to have multiple abstraction definitions support in the tool.
Associated revisions
[CORRECTIVE] Enabled editing of multiple abstraction definitions in bus interfaces (refs #307).
[ADDITIVE] Added abstraction type validation to bus interfaces (refs #307).
[ADDITIVE] Added abstraction type selection to bus interface port maps (refs #307).
[CORRECTIVE] Fixed bus interface port map handling to take into account multiple abstraction types (refs #307).
History
#1 Updated by Esko Pekkarinen over 7 years ago
- Target version set to Longterm
#2 Updated by Kai Liu over 7 years ago
The individual abstraction type has to be bound to a view, which can then be used in the design configuration. Currently, only multiple views can be defined, but no real relationship between the view and other elements can be established, e.g. physical ports (wire and transactional), abstraction types of bus definitions.
#3 Updated by Kai Liu over 7 years ago
Forgot the mention: an abstraction type and a physical port can be assigned with multiple views as described in the spec.
#4 Updated by Mikko Teuho about 6 years ago
- % Done changed from 0 to 70
#5 Updated by Mikko Teuho about 6 years ago
- % Done changed from 70 to 80
#6 Updated by Mikko Teuho about 6 years ago
- Status changed from New to Closed
- Assignee set to Mikko Teuho
- % Done changed from 80 to 100
#7 Updated by Esko Pekkarinen almost 6 years ago
- Target version changed from Longterm to 3.6